User's Manual

11 / 17
3. Charging
3.1. Charging method
Step 1: The charge port is on the tail of the battery, see picture1
Step 2: Inset the charging port of the charger to that of the batter (please make sure the
charge port is dry).
Step 3: When the charger indicator turns red, it is charging; when it turns green, it is
fully charged. After fully charged, please stop charging, as long-term charge
will affect the service life of the battery.
Step 4: After charging, please cover the charging port in case water in.
3.2. Safety tips when charging
∙ Please charge at least 5 hours before first use.
∙ In order to maximum extend the battery life, please charge it every one month or two days after riding it. Please charge it
under proper temperature and environment.
∙ Not charging timely may cause battery damage. As time goes by, battery capacity will gradually run out, and eventually lead
to battery over-discharge.
∙ Please use the battery, charger and cable provided by original manufacturer, to avoid dangers caused by battery overcharge .
∙ Please ensure correct connection of the charger and the cable, as well as enough ventilation environment.
∙ Please use it under dry condition. It is NOT allowed to make the charger or cable connect with water, as it may result in
electric shock. Please do not tough with wet hands. If there is any failure during charging, please immediately pull up the
power plug.
∙ Please guarantee to pull it up from the plug, not from the cable.