User's Manual

click to navigate
20
advanced call features
Advanced call features are controlled by the Inmarsat
network. To check or change these features, the
phone must be connected to the satellite with a signal
strength of at least two bars.
Sending your caller ID
Select Menu > Settings > Call settings > Send my
caller ID, then select On, Off or Set by network and
press OK. Set by network leaves it to the network
to select whether Caller ID is displayed. The default
setting is Set by Network.
When Send my caller ID is on, your caller ID will be
displayed on the recipient’s phone. If this feature
is switched off, your caller ID will be hidden and
Withheld displayed in its place.
Setting up call waiting
Select Menu > Settings > Call settings > Call
waiting, and select Activate. There may be a short
delay before the network responds. Activated will
appear when the setting has been enabled. The
Call waiting default setting is off. From the Call
waiting menu you can also select to Check status or
Deactivate. To use call waiting, see Using call waiting
on page 16 for more information.
Call barring
An IsatPhone Pro SIM card always uses an international
number format, + or 00, and the country code, 870.
Call barring prevents the following call types from
being made or received by your phone:
• Outgoing calls: bars all outgoing calls
• International calls: bars all outgoing calls
• International except to home: bars all outgoing calls
except to other Inmarsat numbers
• Incoming calls: bars all incoming calls
• Incoming outside home: bars all incoming calls
except from other Inmarsat numbers
If you are using a SIM card with local country
numbering, the call barring is as described by
the menu.
The first time you set up call barring, you will need to
reset the barring password. Select Menu > Settings
> Call settings > Call barring. Select Options and
navigate to Change barring pass code. Enter the
barring pass code and select OK. The default is 0000.
Enter a new four-digit pass code and select OK. Then
enter the new pass code again to confirm it.
You will need to enter this new pass code whenever
you change your call barring settings.
To cancel a bar, highlight that type of call in the Call
barring menu, select Options and select Cancel.
To cancel all call barring, select Options and select
Cancel all barring. To check the status of a call bar,
highlight that type of call in the Call barring menu,
select Options and select Check status.
321
advanced call features
02 welcome
03 safety
06 quick reference
09 getting started
13 using your IsatPhone
13 connecting to the satellite
13 obtaining a GPS x
14 making and receiving calls (4)
17 calling handsfree
18 using voicemail
18 additional call features (2)
20 advancedcallfeatures(3)
23 messaging (6)
29 using your GPS location information
30 prepay services
31 phonebook, contacts and organiser
36 data
37 personalised settings
44 security
47 troubleshooting
50 care and maintenance
52 regulatory and compliance
55 disclaimers
56 accessories
57 export controls
58 malware
59 downloading content
60 notices
61 protection of personal information
62 index