User Manual
P a g e | 49
GXV3240 User Guide
GXV3240 allows users to press # key as SEND key. This behavior can be disabled via option "Use #
as Dial Key" under web GUI->Account->Call Settings, when this option is disabled, the pound “#”
key can be included as part of the dialed number or it will be used as redial key when the input area
has no number (please make sure the dial plan is properly configured to allow dialing # out).
When the user enters the digit on the dial screen, if there is digit matching call history, or contacts
name/number, the drop-down list will show the numbers. For example, if "John" is saved in the
contacts, entering 5 (JKL) 6 (MNO) 4 (GHI) 6 (MNO) will show call log with 5646 as the first four digits,
as well as John's number. Users could then directly select one of them from the list, instead of entering
all the digits.
Redial
Users can dial out the last dialed number if there is dialed call log, using the same SIP account making the
call last time. There are two ways to redial the last dialed number.
When the phone is idle or off hook, press SEND button to redial.
When the phone is on hook, press SEND button or # button (# key is used as dial key).
Dial a Number Via Contacts
Follow the steps below to dial a number via Contacts.
1. Access Contacts by tapping on icon on the bottom of the idle screen, or selecting from
phone's menu.
2. Navigate in the contacts entries by sliding up/down on the screen.
3. Tap on the dial icon for the contact .
Figure 32: GXV3240 View Contacts