User Manual

16
increase or decrease the temperature setting value, then press
"
SET" button to confirm and exit. When TR=1 or 2,SV shows
the temperature setting value and flashes, then short press
“ ” or “ ” button to increase or decrease the temperature
setting value. Long press the“ ” or “ ”button to increase or
decrease the temperature setting value quickly. Press the
"
SET" button to switch to the current stage control duration
value. Short press the “ ”or “ ” button to change the
current stage control duration value. Press the “
SET" button to
switch to whether to alarm after the completion of the current
stage, then press “ ” or “ ” to modify the setting value .
Press “
SET” button again to confirm and exit. If there is no
operation for 3 seconds ,It will automatically exit after 10
seconds and save the setting value.
2.5 Button Function in Setting Mode
When the controller is working normally, press the “SET”
button for 2 seconds to enter the setting mode. The PV shows
the first menu code “
TS”, if TR=1 or 2, the PV shows the
second menu code“
HD”, SV shows the corresponding setting
value. Press “
SET” button to scroll down the menu item and
save the parameters of the previous menu item. Press “ ” or
“ ” button to change the current setting value. If in the
setting state, there is no operation within 30 seconds or long
press "SET" button for 2 seconds, it will exit and save the
setting state and return to normal operation mode.