User Manual

Main features
Plug and play design, easy to use;
Dual relay output, be able to connect with refrigeration
and heating equipment at the same time;
Support reading with Centigrade or Fahrenheit unit;
Maximum output load: 1200W(110V) / 2200W(220V);
Dual display window, be able to display measured
temperature and set temperature at the same time;
Temperature calibration;
Compressor delay protection for refrigeration control;
High and low temperature alarms are available;
Over-temperature and sensor fault alarm;
Heating/cooling dif
ferential function could be set
separately for refrigeration and heating to protect
temperature controller from violent change.
3.Specification
Temperature Control Range
-50~120 °C / -58~248 ° F
Temperature Resolution
0.1 ° C / 0.1° F
Temperature Accuracy
±1°C (-50 ~ 70°C) / ±1°F (-58 ~ 160° F)
Temperature Control Mode
On/Off Control, Heating and Cooling
Input Power
100 ~240VAC, 50Hz/60Hz
Temperature Control Output
Max. 10A, 100V ~240V AC
Buzzer Alarm
High and Low Temperature Alarm
Sensor Type
NTC sensor (Including)
Sensor Length
2m / 6.56ft
Cooling (10A, 100-240VAC)
Heating (10A, 100-240VAC)
Input Power Cable Length
1.5m ( 5ft )
Dimension (Main Body)
140x68x33mm (5.5x2.7x1.3 inc
h)
Ambient Temperature
-30~ 75 ° C / -22~ 167 ° F
Temperature: -20~ 60 ° C / -4~ 140 ° F
Humidity: 20~85% (No Condensate )
1 Year
Warranty
Storage
Relay Contact Capacity
2