PID Temperature Controller ITC-106 User Manual Version 1.0 Inkbird Tech. Co., Ltd. Copyright Copyright© 2016 Inkbird Tech. Co., Ltd. All rights reserved. No part of this document may be reproduced without prior written permission. Disclaimer Inkbird has made every effort to ensure that the information contained in this document is accurate and complete; however, the contents of this document are subject to revision without notice. Inkbird to ensure you have the latest version of this document.
ITC-106 User Manual Contents 1. Safety Precautions ................................................................................................ 3 2. Specification ........................................................................................................ 4 3. Dimension and Installing ....................................................................................... 5 4. Wiring Diagram ....................................................................................................
ITC-106 User Manual 1. Safety Precautions Ensure the product using within the specification. Do not touch the terminals at least while power is being supplied. Doing so may occasionally result in injury due to electric shock. Do not allow pieces of metal, wire clippings, or fine metallic shaving or filings from installation to enter the product. Doing so may occasionally result in electric shock, fire, or malfunction. Do not use the product where subject to flammable or explosive gas.
ITC-106 User Manual 2. Specification AC 100~240V 50/60Hz (model:ITC-106RH, ITC-106VH) Supply Voltage AC/DC 12~24V 50/60Hz (model:ITC-106RL, ITC-106VL) DC 12~24V (model:ITC-106RL, ITC-106VL) Operating Voltage Range 85~110% of the rated voltage 5VA（100~240VAC） 4VA（12~24VAC） Power Consumption 3W（12~24VDC） PV: displays in red high luminance LED with 9.9mm height of 4 digits Display Code SV: displays in green high luminance LED with 8.00mm height of 4 digits ±0.2%FS 0.
ITC-106 User Manual 3. Dimension and Installing Size Diagram (Unit: mm) Shell Size Install Adapter Panel Cutout Insert the temperature controller into the hole in the panel, put the adapter from the back and push it to button and make it clasp for temporarily fastening. Be sure there is no gap among the controller, panel and the adapter and then fasten the two screws on the adapter with the torque of 0.29N to 0.39N.
ITC-106 User Manual 5. Panel Instruction ① PV Displaying Screen: Displaying the measuring value or the setting parameters. ② SV Displaying Screen: Displaying the setting value or the set parameters readout. ③ Working Indicator Light OUT: Control Output Indicating ALM: Alarm Output Indicating RUN: Manual Operation Indicating ④ UP Button: when setting the value, pressing the up button can be increase the value that would be added rapidly by keeping press this button.
ITC-106 User Manual 6. Setting Parameters 6.
ITC-106 User Manual 6.23 Sensor Input Type Setting: Set the sensor input type as required(the faulty is the "K" type), the temperature need to calibrated for there will be deviation due to the sensor and the operating environment. 6.
ITC-106 User Manual Inkbird Tech. Co., Ltd. www.ink-bird.
ITC-106 User Manual 7. Technical Assistance and Warranty 7.1 Technical Assistance If you have any problems installing or using this thermostat, please carefully and thoroughly review the instruction manual. If you require assistance, please write us to cs@ink-bird.com. We will reply your emails in 24 hours from Monday through Saturday. You can also visit our web site www.ink-bird.com to find the answers of the common technical questions. 7.2 Warranty INKBIRD TECH. C.L.
