Instructions / Assembly

Table Of Contents

Page 2 of 2

Thank you for your purchase

ADDITIONAL NOTE ABOUT SAFETY: BOLTS MAY LOOSEN DURING NORMAL EVERYDAY USE. THEY SHOULD BE

PERIODICALLY INSPECTED AND RE-TIGHTENED TO PREVENT DAMAGE OR INJURY.ALWAYS CHECK TO ENSURE

THAT ALL HARDWARE IS KEPT TIGHTENED.

Step 1.Assemble the chair on a flat, soft surface such as carpet or cloth to prevent scratching the finish. Open the carton and

take out legs inner box.

Step 2.Screw in the front legs (P3) using Plastic Washer (H1) for each. Screw tight to the right angle. .

Step 3.Screw in the front legs (P4) using Plastic Washer (H1) for each. Screw tight to the right angle.

Step 4.Insert the small metal arms on the sides of the Chair Backrest(P1) into the prefabricated slide lock gadget on the Chair

Seat(P2) as shown above.

Step 5.Level the chair and place the chair upright on a level surface. Assembly is complete.

P3X2

P4X2

H1X4

Remove the plastic

caps from screw

heads before

attaching legs.

Remove the plastic

caps from screw

heads before

attaching legs.