Instructions / Assembly

Important safety instructions：
• Please read carefully all instructions before assembling.
• For your safety and ease, assembly by two or more adults is recommended.
• Keep instructions for future use.
Pre-assembly：
• Remove all parts and hardware from box along with any protective packaging.
Parts List
Item
Description QTY
P1 Chair Body 1
P2
Legs
2
P3
Seat Cushion
1
P3
Back Cushion
1
Hardware List
Item Description QTY
H1
Long Bolt
Φ5/16"*1-1/2"
8
H2
Allen wrench
1/5"
1
H3
Flat Washer
Φ5/16"
8
H4
Spring washer
φ5/16"
8
DRAWING
ASSEMBLY INSTRUCTIONS
Madden Lounge
• Do not discard any content until assembly is completed to avoid accidentally discarding small parts or hardware.
DRAWING
Disclaimer:
Thank you for your purchase
Page 1 of 1
ADDITIONAL NOTE ABOUT SAFETY: BOLTS MAY LOOSEN DURING NORMAL EVERYDAY USE. THEY SHOULD BE
PERIODICALLY INSPECTED AND RE-TIGHTENED TO PREVENT DAMAGE OR INJURY.ALWAYS CHECK TO
ENSURE THAT ALL HARDWARE IS KEPT TIGHTENED.
When properly assembled, this item is safe for intended use. Seller is not liable for any damages resulting from item being
improperly assembled after purchase.
Step 1: Assemble the chair on a flat,soft surface such as carpet or cloth to prevent scratching the finish.Take out the legs
and hardware package under the cushion.
Step 2: Attach legs(P2) to the seat frame by using flat washer (H3),spring washer(H4), Long Bolt (H1)and use Allen
wrench(H2)to tighten the bolt !
Step 3
：
Level the chair and place the chair upright on a level surface.