Owners manual

Install the air filter to the lower intake assembly and
tighten using 8mm nut driver.
Re-position if necessary and tighten if needed. Make sure there is enough
clearance. Re-install the bumper cover and connect the battery terminals.
Figure 27
Figure 28
Page 4 of Part# SP5040
 
 

 
 
 
 
 

 
 
 
Congratulations! You have just completed the installation of this intake system.
Periodically, check the alignment of the intake, normal wear and tear can cause
nuts and bolts to come loose.
Note: Check clearance and adjust if needed!
Failure to check the alignment and adjust the intake can cause damage that
will void the warranty
. Injen Technology is not responsible for any damages
caused by/from improper installation. .
Figure 29