Owners manual

ManualsBrandsINJEN ManualsAutomotiveInjen SP1572BLK Short Ram Air Intake System Fits 16-18 Civic

Instruction Manual P/N:SP1572

Vehicle Application:

Make: Honda

Model: Civic (10th Gen)

CVT Only

Year: 2016

Engine: 1.5L 4-cyl Turbo

Page 1 SP1572

TOOLS REQUIRED

• 10mm Ratchet & Socket

• 8mm nut driver

• Allen key

• Flat Blade Screwdriver

• Phillips Screwdriver

244 Pioneer Place Pomona California 91768 U.S.A Office: (909) 839-0706 FAX: (909)839-0427 Email:Tech@injen.com WWW.INJEN.COM

A Limited Lifetime Warranty to the original purchaser against defects in material and workmanship on all Injen intake systems excluding the filter element.

Any and all warranty coverage is limited to the repair or replacement of the defective part only, at Injen Technology’s discretion. The warranty does not

cover incidental or consequential damages, nor does it cover the cost of installation or removal of the defective part or its replacement. Proof of purchase

is required.

Report any defective or missing parts to the authorized Injen dealer you purchased this product from. Before installing any parts of this system,

please read the instructions thoroughly. If you have any questions regarding installation, please contact your Injen Technology dealer. Installation

DOES require some mechanical skills. A qualified mechanic is always recommended.

WARNING: FAILURE TO FOLLOW INSTALLATION INSTRUCTIONS AND NOT USING THE PRO-

VIDED HARDWARE MAY DAMAGE THE INTAKE SYSTEM, ENGINE AND COMPONENTS!!!

*Do not attempt to install the intake system while the engine is hot.

Severe burn could result from touching hot engine components!

Item QTY. P/N Discription

A 1 Y-SP1572 Intake Tube

B 1 #1062 Air Filter

C 1 #11132 Heatshield

D 1 #3039 Straight hose

E 2 #4008 #36 clamps

F 1 #20118 Bracket

G 1 #6058 Rubber trim @ 14" L

H 1 #6023 Vinyl trim @ 9" L

I 1 #6020 M6 vibramount

J 3 #6010 Fender washer

K 1 #6002 M6 nut

L 2 #6005 M6 hex screw

Summary of content (5 pages)

PAGE 1
Instruction Manual P/N:SP1572 Vehicle Application: Make: Honda Model: Civic (10th Gen) CVT Only Year: 2016 Engine: 1.5L 4-cyl Turbo D Item QTY. J G F K I E A H B L &J C L &J WARNING: FAILURE TO FOLLOW INSTALLATION INSTRUCTIONS AND NOT USING THE PROVIDED HARDWARE MAY DAMAGE THE INTAKE SYSTEM, ENGINE AND COMPONENTS!!! *Do not attempt to install the intake system while the engine is hot.
PAGE 2
Instruction Manual NOTE: This intake kit may not work on vehicles with the following aftermarket modifications. •Aftermarket Intercooler piping •Aftermarket intercooler •Turbo upgrade •Modified body panels •Suspension & Chassis modifications P/N:SP1572 Injen intake systems are street legal in most states unless the state is adopting to California Emissions standards.
PAGE 3
Instruction Manual P/N:SP1572 MAF sensor MAF sensor 1. Stock intake system shown. 4. Remove the sensor from the air box. Save 2. Disconnect the MAF sensor. 5. Loosen the 2 bolts holding in the air box and Loosen the clamp on the turbo housing using phillips screwdriver. 3. Using phillips screwdriver, loosen the 2 screws holding in the MAF sensor. 7. screws for later install. remove. Lift up and remove the complete stock air box assembly out of vehicle. 6.
PAGE 4
Instruction Manual P/N:SP1572 12. Now install the rubber trim to the heatshield. Cut a notch in corner for easier installation. 13. Install the heatshield into the vehicle and position. 14. Secure the bottom of the heatshield to the thredded insert on vehicle frame using provided M6 screw with fender washer. 15. Secure the tab to the front of the raiator support. Locate the thredded insert and secure using provided M6 screw and fender washer. 16.
PAGE 5
Instruction Manual 24. P/N:SP1572 Verify all conections are secure and check for clearance. Congratulations! You have just completed the installation of this intake system. Periodically, check the alignment of the intake, normal wear and tear can cause nuts and bolts to come loose. Note: Check clearance and adjust if needed! Failure to check the alignment and adjust the intake can cause damage that will void the warranty.