User's Manual

Promi SD™ User Manual ver 1.7
www.initium.co.kr
15
Configuration By Promi-WIN™
Please prepare two of the Promi SDs to make connection.
Let’s say 1st unit as ‘SD01’ and 2nd unit as ‘SD02’ in this guide book. Make sure that
power to both SD01 and SD02 are ALWAYS supplied, even when you detach from your
computer.
2.1.1 Let’s make SD01 to be discoverable/connectable.
In this procedure, SD01 will become discoverable/connectable to be able to receive
connection from SD02.
1-1. Attach SD01 to your PC, and start Promi-WIN™
1-2. Start PromiWIN™ then you will see a pop-up window for configuration of
PromiWIN™.
<Fig. 1.1>
1-3. Select the number of the Serial port where SD01 is attached as in the Fig. 1.1
above.
1-4. Users need to select exactly same
Baud/Parity/StopBit as real settings of
attached SD01. 9600/No/OneStopBit are default initial settings of all of Promi SDs.
1-5. Press OK button when finished.