User's Manual

Promi-SD™ User Manual ver 1.3
www.initium.co.kr
53
cation,Encryption<cr
><lf>
<cr><lf>OK<cr><lf>
state and status of authentication
and encryption features.
21)
AT+BTLPM,n<cr>
<cr><lf>OK<cr><lf>
Enable or disable the low power
mode of dongle.
n = 1 or 0
22)
AT&V<cr>
<cr><lf>S0: m0;S1:
m1; … Sn:
mn<cr><lf>
<cr><lf>OK<cr><lf>
View all the values of internal S-
registers
23)
AT+BTSD?<cr>
<cr><lf>bdaddr of
secured device
1<cr><lf>
<cr><lf>bdaddr of
secured device
1<cr><lf>
<cr><lf>OK<cr><lf>
Query the bd-addresses of secured
devices
24)
AT+BTCSD<cr>
<cr><lf>OK<cr><lf>
Clear the list of secured devices
25)
AT+BTFP,n<cr>
<cr><lf>OK<cr><lf>
Force paring when connecting as
master
26)
AT+UARTCONFIG,baudrate,parity,st
opbit<cr>
<cr><lf>OK<cr><lf>
Sets the configuration of UART
interface. Possible values are;
baudrate
=1200,4800,9600,19200,38400,5760
0 or 115200.
parity = N(o parity), E(ven parity) or
O(dd parity).
stop = 1 or 2.
27)
ATS10=1<cr> :
Enabling all of the response messages- OK, CONNECT, DISCONNECT, and ERROR.
ATS10=0<cr> :
Disabling all of the response messages- OK, CONNECT, DISCONNECT, and ERROR.
ATS10?<cr> : To see current status of ATS10