User's Manual

Promi-SD™ User Manual ver 1.3
www.initium.co.kr
24
AT+BTAUTH,Auth,Encr<cr>
√
3)
AT+BTMODE,n<cr>
√
3) 4)
AT+BTNAME=”Name”<cr>
√
3)
AT+BTKEY=”nnnn”<cr>
√
3)
ATS10=0 or ATS10=1
AT+BTINFO?<cr>
√ √
AT+UARTCONFIG,b,p,s<cr>
√
3) 4)
1) Effective when Promi-SD™ is not in connection with Bluetooth.
2) Effective when Promi-SD™ is in connection status with Bluetooth.
3) Recommend to be used when Promi-SD™ is not in connections status with
Bluetooth
4) To apply new values to Promi-SD™, software reset requires by ATZ
command or restart Promi-SD™.
*NOTE: Full AT commands set can be found in Appendix B.