User's Manual

38
Promi-MSP™
Installation Guide ver. 2.0
www.initium.co.kr
the last virtual COM port to create. This helps avoid rebooting when the virtual
COM port is set.
• Window NT series: By clicking [Set] button, the virtual COM port is created.
• To change properties of the virtual COM port, set properties and click the [Set]
button. Properties are set without rebooting Windows 9X or Windows NT
series.
Monitoring Virtual COM Port
[TD] indicates that the serial application is sending data to the serial server.
[RD] indicates that the serial server is sending data to the serial application.
The [DTR][DSR][RTS][CTS][DCD] and [RI] column displays the status of each pin.
[Connected] at [Status] column indicates that the network is connected.
[Disconnected] at [Status] column indicates that the network is disconnected.
Tracing Virtual COM Port
Select a COM port to trace.
Open [HelloDevice VirtualCOM Tracer] window by clicking [Port Trace] button from
the HelloDevice VirtualCOM window.
*CAUTION
VirtualCOM operates in background mode. Operation status may be audited from
the Windows tray. EXIT VirtualCOM during Serial Com. Program operation may
damage the Host system. First close the serial communication program when
desiring VirtualCOM EXIT.