User's Manual

37
Promi-MSP™
Installation Guide ver. 2.0
www.initium.co.kr
Uncheck the COM port to delete.
• COM port, displaying [Not Connected serial App.] in the [remark] column, can
be deleted.
• COM port, displaying [Connected serial App.] at [remark] column, cannot be
deleted; it is already connected to a serial application.
Click [OK] button. Accordingly, COM ports are selected or deleted.
[ HelloDevice VirtualCOM window after selecting / deleting COM port ]
Setting the Properties of Virtual COM Port
Check the COM port to set properties.
Select [IP Address] or [Domain] option.
Enter the IP address or domain name.
Set the COM Port Properties options. COM port displaying [Not Set Server] in the
[Remark] column requires setting.
• [DSR always set] option: DSR pin is set as high during communication.
• [DCD always set] option: DCD pin is set as high during communication.
• [Reconnect when failed] option: In serial Server connection failure, the
HelloDevice VirtualCOM attempts connection.
Click [Set] button to create the virtual COM port.
• Windows 9X series: [Reboot] dialog opens. Virtual COM port is created after
system rebooting. When intending to create more than one port, it is better to
click [Reboot Now] button at [Reboot] dialog on clicking [Set] button after setting