User's Manual

24
Promi-MSP™
Installation Guide ver. 2.0
www.initium.co.kr
If unregistered device tries to connect to Promi-MSP, Promi-MSP will assign the port
number consecutively from Defalt Data port.
 KeepAlive Timeout
When TCP connection is stopped unexpectedly (Ex. Power off of Host PC), Promi-MSP
will request NULL during KeepAlive Timeout (second). If there is no response during
this Timeout, TCP connection will be finished.
 Do not disconnect TCP socket
In Server Mode, each TCP connection and Bluetooth connection will be matched as
point-to-point. When new Bluetooth connection is established, new TCP connection will
be established as well.
So, if Bluetooth connection is stopped, TCP connection can be finished.
To prevent this, users may use this option, so does not need to make TCP connection
whenever Bluetooth connection is stopped.
 Register Bluetooth Device :
Shows the Bluetooth devices registed.
 Add : Add Bluetooth device to register.
 Delete : Remove Bluetooth device registed.
 Modify : Modify Port of the selected device.
b) Client Mode
In Client Mode, Promi-MSP will act as a TCP client. When a Bluetooth device connects
to Promi-MSP, Promi-MSP will try to connect to the designated Host PC. So, Host PC
should be in standby status.
In Client Mode, please select the IP address and port number of the Host PC to connect.