User's Manual

Promi-MSP™

Installation Guide ver. 2.0

www.initium.co.kr

2.3.2 Firmware Upgrade via TFTP:

 Users may upgrade the firmware using TFTP via Crossed cable.

3. Firmware Download → 2.TFTP

 Then you will get following screen:

 Please keep this serial console connected.

 For firmware upgrade via TFTP, network configuration of your PC which is connected

to Promi-MSP should be changed. Open your Network Connections and see Property

information of Local Network in your PC and change configuration as follows for direct

communication with Promi-MSP.

IP: 192.168.1.11

Subnet: 255.255.255.0

Gateway: 192.168.1.1

These settings for direct communication only with Promi-MSP connected.

 After you save the MSP upgrade ROM file to your PC, please open COMMAND

window as in bleow.

 Users need to make sure that the upgrade ROM file is in the same location or users

need to specify the exact location to send the ROM file to the connected Promi-MSP

via Crossed ethernet cable.

TFTPd ready. Send firmware using TFTP.

Windows 2000/XP:

tftp –i 192.168.1.10 put <filename>