User's Manual

Promi-ESD User Manual – Configurations 21

controlled. With 0 input for this waiting time, Promi-ESD keeps waiting for

connection until [Cancel] button is clicked.

Terminal Program

A terminal program is an application that will enable a PC to communicate

directly with a modem. If you are using Windows 98SE or higher version of

Windows, HyperTerminal program as it is included as part of the operating

system. Promi-ESD provides some extended AT commands for its

configurations on terminal program.

This manual will explain the method using HyperTerminal. If you need to install

HyperTerminal, click start>setting>control panel>add/remove programs. For

more precise information, please refer to Help of Microsoft Windows.

Attach Promi-ESD to serial port of host computer and power on.

Launch HyperTerminal. It can be found in start >programs >accessories

>communication >HyperTerminal. Select the Serial port that Promi-ESD will be

connected to.

Input the same settings into Serial port configuration window as Promi-ESD

settings.

The settings need to be set correctly, otherwise, error message may be shown

up on the screen or cause malfunctioning of Promi-ESD.