User Manual

12
3.1.6 Configuration Management
Here you can back up the configuration parameters, import the desired parameters backup and
reset the router.
From the navigation tree, select System >> Config Management, then enter the “Config
Management” page.
Table 3-1-6 Parameters of Configuration Management
Configuration Management
Function description: Set parameters of configuration management.
Parameters
Description
Default
Browse
Choose the configuration file
N/A
Import
Import configuration file to router
N/A
Backup
Backup configuration file to host
N/A
Restore default
configuration
Select to restore default configuration (effective after
rebooting)
N/A
Modem drive
program
For configuring drive program of module
N/A
Network Provider
(ISP)
For configuring APN, username, password and other
parameters of the network providers across the world
N/A
Validity and order of imported configurations should be ensured. The good configs will later
be serially executed in order after system reboot. If the configuration files didn’t be arranged
according to effective order, the system won’t enter the desired state.
In order not to affect the operation of the current system, when performing an import
configuration and restore default configuration, users need to restart the device to make the
new configuration to take effect.
3.1.7 Task Schedule
After this function is enabled, the device will restart as the scheduled time.