User Manual

10
The device supports Telnet Client and Telnet Server.
Console
The console port, also called the access or serial port, refers for initial configuration and
subsequent management of a device. It has the same terminal as the telnet client.
From the navigation tree, select System >> Admin Access, then enter “Admin Access” page.
Table3-1-4 Parameters of Admin Access
Admin Access
Function description:
1. Modify username and password of router.
2. The router may be set by the following 4 ways, i.e. http, https, telnet and console.
3. Set login timeout.
Parameters
Description
Default
Username/Password
Username
Set name of user who logs in WEB configuration
adm
Old
Password
Previous password access to WEB configuration
123456
New
Password
New password access to WEB configuration
N/A
Confirm
New
Password
Reconfirm the new password
N/A
Amin functions
Service Port
Service port of HTTP/HTTPS/TELNET/Console
80/443/23
Local Access
Enable - Allow local LAN to administrate the router with
corresponding service (e.g. HTTP)
Disable - Local LAN cannot administrate the router with
corresponding service (e.g. HTTP)
Enable
Remote
Access
Enable - Allow remote host to administrate the router
with corresponding service (e.g. HTTP)
Disable - Remote host cannot administrate the router
with corresponding service (e.g. HTTP)
Enable
Allowed
Access from
WAN
(Optional)
Set allowed access from WAN (only HTTP/HTTPS/TELNET)
The host
controlling
service at this
moment can be
set, e.g.
192.168.2.1/30
or
192.1682.1-192.1
682.10
Description
For recording significance of various parameters of
N/A