User Manual

9
Time
you may select when startup or very
1/2/...hours.
3.1.3 Serial Port
Setting the parameters of router’s serial port according to the serial port of the terminal device
connected with router to achieve the normal communication between router and terminal
device.
From the navigation tree, select System >> Serial Port, then enter “Serial Port” page.
Table 3-1-3 Serial Port Setting Parameter Description
Serial Port
Function description: Set relevant parameters based on application of the serial port.
Parameters
Description
Default
Baud Rate
Serial baud rate
115200
Data Bit
Serial data bits
8
Parity
Set parity bit of serial data
None
Stop Bit
Set stop bit of serial data
1
Software
Flow
Control
Set whether to enable software flow control and enable software
flow control
Disable
3.1.4 Admin Access
Admin services include HTTP, HTTPS, TELNET and console.
HTTP
HTTP (Hypertext Transfer Protocol) is used for transferring web pages on Internet. After enabling
HTTP service on device, users can log on via HTTP and access and control the device using a web
browser.
HTTPS
HTTPS (Secure Hypertext Transfer Protocol) is the secure version of hypertext transfer protocol.
As a HTTP protocol which supports SSL protocol, it is more secure.
TELNET
Telnet protocol provides telnet and virtual terminal functions through a network. Depending on
Server/Client, Telnet Client could send request to Telnet server which provides Telnet services.