Installation guide

{|
5. Remove screws from door
, bottom,
(4 screws). Keep door screws separate from hinge screws
as they are diferent sizes. Holding door over towel on dryer,
grasp sides of outer door and lift to separate it from inner
coor.
NOTE: Do not pry apart with putty knife or screwdriver.
Do not pull on door seal or plastic door catches.
(6. Rotate outer door
Take outer door and rotate in 180° and set it back down on
inner door. Be certain to keep cardboard spacer centered
between doors. Reattach outer door panel to inner door
panel so handle is on the side where hinges were just
removed. Insert 4 door screws.
(
7. Flip door over
Flip door over so handle side is down.
18
Reattach door hinges to dryer door so that the larger hole is
at the bottom of the hinge.
a .
9. Remove door strike
——
/—~>
Remove door strike from dryer cabinet and set aside.