User's Guide

INGICS TECHNOLOGY

Conﬁguration

When powered on, iBS05 will be in conﬁguration mode for 20 sec. Users can use iBS01 Tag Utility to scan and connect iBS05

to conﬁgure the transmit power and ADV(advertising) interval.

Steps

1. Power on iBS05

(if iBS05 is already powered on,

please power off it ﬁrst then power

on again)

2. Press the CONFIG icon on the up-right

corner of the utility within 20 secs. Select

iBS05 for conﬁguration.

3. In the SETTING page, you can

conﬁgure TX power and ADV interval.

After conﬁguring, ress SAVE and

DISCONNECT for the parameters to

take effect.

Parameters

In iBS05, there are two parameters that can be conﬁgured.

a. TX power: +4 dBm ~ -20dBm.

b. ADV Interval: From 100 ms~60 min.

Waste Electrical and Electronic Equipment Recycling

Our product is compliant with the WEEE directive for re-use/recovery/recycling. This cross-out

wheeled-bin symbol is a reminder that this product should not be treated as household waste. Instead

hand it over to the appropriate collection point for the recycling of electrical and electronic equipment in

accordance with local environmental regulations for waste disposal.

Since our product is not sold directly to the end user and generally it is a part of our customer’s solution,

our customer is recognized as a professional seller. Our customer has the responsibility to comply with

the requirement of the directive too. To help our customers, when necessary, we will provide a WEEE

compliant assessment report for registering and communicating with the local authorities and recycling

agency.

Certiﬁcation

Japan MIC Regulatory

FCC Regulatory

2AH2IIBS05

NCC Regulatory

INGICS TECHNOLOGY CO., LTD. • SUPPORT@INGICS.COM • WWW.INGICS.COM