How-To Guide

Frequently Asked Questions (FAQ):
1. Why is the Wireless Icon in Red?
Answer: The wireless tool icon will be in red when a paired tool is in idle or sleep mode.
Please pull trigger to wake the tool. Shortly after the tool is active, the wireless tool icon
will be green again.
2. I have pressed the left and ok button but tool still can’t pair. There is no blinking LED. What
should I do?
Answer: Please double check that the Wireless Radio is turned on. Follow these
instruction to check wireless status:
From the back cap, go to the passcode screen
Enter the 4 digit passcode (by default FFFF).
Press the left button to view the Wireless status. Enable Wireless if it is currently
disabled
3. I have just updated the tool firmware but the Wireless Tool screen is showing that the tool
still needs to be updated.
Answer: User may have to update both the MCE and Display which may require 2 separate
updates. Please make sure both MCE and Display have been updated.
4. MCE version is empty or showing "0.0.0"
Answer: The MCE info is not available. This is because the tool might be in Idle mode. Pull
the trigger to wake up the tool and check again.
Was this article helpful?