How-To Guide

WRITTEN INSTRUCTIONS:
Pre-requisite: The QXX tool firmware needs to be compatible with the INSIGHTqcx controller.
Please connect the QXX tool using a USB cable to the INSIGHTqcx controller to check and update
the firmware.
1. Check that the wireless radio is enabled on QXX.
From the back cap, go to the passcode screen.
Enter the 4 digit passcode (by default FFFF).
Press the left button to view the Wireless status.
Enable Wireless if it is currently disabled.
2. From the INSIGHTqcx controller, please login as needed.
3. Follow the steps below to pair a QXX tool with an INSIGHTqcx Cordless Controller.
Note: User can also follow a guided video on the Wireless Tool Pairing screen for the same
instruction.
Steps Instruction
1.
Click on the Wireless Tool icon
2. Click on the Pair button on the screen