Product Manual

8 MHD56102 - Edition 10
ENGLISH
(Dwg. MHP0014)
3. To replace chain:
a. Cut a length of chain 2 times the required hand chain
drop plus 1 foot (30 cm).
b. Run the new chain up through the left hand chain guide,
around the hand wheel, making sure the hand chain is
seated in the hand wheel pockets, and back down
through the right hand chain guide.
4. To adjust chain length:
a. Add or remove a length of chain 2 times the desired
amount of chain adjustment.
NOTICE
• To prevent the hand chain from twisting maintain an even
number of links. Refer to Dwg. MHP0015.
5. Connect the hand chain ends with the “C” link(s), make the
total number of links even, and bend the “C” link(s) shut.
6. Make sure the hand chain is not twisted. To untwist, open a
“C” link and remove one hand chain link.
(Dwg. MHP0015)
Untwisted
Twisted
Do Not Use