Product Manual

Page 6 of 12 PX05X-XXX-XXX-BXXX (en)
PARTS LIST / PX05X-XXX-XXX-BXXX FLUID SECTION
NOTE: DO NOT OVERTIGHTEN FASTENERS.
(14) Bolt, 95 - 105 in. lbs (10.7 - 11.9 Nm).
LUBRICATION / SEALANTS
ASSEMBLY TORQUE REQUIREMENTS
 Apply pipe sealant to threads.
 Apply Lubriplate FML-2 grease to all “O” rings, “U” cups and mating parts.
(26) Bolt, 50 - 60 in. lbs (5.6 - 6.8 Nm), / alternately and evenly, then retorque
after initial run-in.
COLOR CODE
PTFE - 7
uid side (white)
View for PX05X-XXS-XXT-B (PTFE diaphragm) /
PX05X-XXS-XXL-B (Long Life PTFE) conguration only.
Santoprene - 8
air side (tan)
(29) Nut, 50 - 60 in. lbs (5.6 - 6.8 Nm), / alternately and evenly, then retorque
after initial run-in.
Torque Sequence
3
2
7
5
1
8
6
4
Material Diaphragm
Color
Ball
Color
Hytrel Cream Black (•)
Nitrile Black Red (•)
Polyurethane Clear Red
Santoprene Tan Tan
PTFE White White
Viton Yellow
(•)
Yellow
(•)
(•) Dot
 Apply Loctite® 242® to threads.
 Apply anti-seize compound to threads and bolt and nut ange heads
which contact pump case when using stainless steel fasteners.
26
61
(PX05X-XSS-XXX-B)
61 (PX05X-XAS-XXX-B)
22
12
21
19
22
27
1
5
7
6
29
14
15
12
21
63
26
60
(PX05X-XSS-XXX-B)
19
63
60 (PX05X-XAS-XXX-B)
Note: Lubriplate FML-2 is a white food grade petroleum grease.
Figure 2