Product Manual

Page 10 of 12 PX01X-XXX-XXX-AXXX (en)
Pumps that will operate in environments dened as “hazardous locations” must only be installed, connected and set-up by
qualied personnel with knowledge and understanding of protection classes, regulations and provisions for apparatus in haz-
ardous areas, for the region where the pump will operate, because these regulations and provisions, along with the denition
of what constitutes hazardous areas vary by location.
Make sure the pump and its accessories comply with the specic requirements of the area it will be installed in. ARO Electronic
interface Pumps (PE series) and its components are available with the following certications:
y
United States
y
Class I, Division 1, Groups A-D, T4
y
Class II, Division 1, Groups E-G, T135°C
y
Class I, Zone 1, Group IIC, T4
y
Zone 20, Group IIIC, T135°C
y
Canada
y
Class I, Division 1, Groups A-D, T4
y
Class II, Division 1, Groups E-G, T135°C
y
Class I, Zone 1, Group IIC, T4
y
Zone 20, Group IIIC, T135°C
y
ATEX (Europe)
y
ATEX Category 2
y
Zone 1, Group IIC, T4
y
Zone 21, Group IIIC, T135°C
y
IEC
y
IEC Category 2
y
Zone 1, Group IIC, T4
y
Zone 21, Group IIIC, T135°C
INSTALLATION OF ELECTRONIC INTERFACE COMPONENTS FOR HAZARDOUS DUTY
APPLICATIONS