Product Manual

6
Air Chain
Hoists
866-207-6923
Disc brake is non-asbestos and spring-engaged
with an air release that oers significant control
while minimizing air consumption.
A two-stage dierential transmission
multiplies motor torque and reduces speed.
Oil lubrication helps create maximum durability.
Gearing components are made from high-strength,
heat-treated steel alloy.
Forged five-pocket pocket wheel provides for
smooth lis and enhanced chain life.
Specially designed slack chain opening
prevents dangerous cross-linking by
guiding chain to the drive wheels.
Upper and lower limit stops prevent dangerous
over-travel of the hook in either direction,
reducing possible damage to hoist and load.
100% duty cycle multi-vane (6) air motor
oers a high-torque and low-maintenance design.
Air porting under the vanes creates smooth
operation, positive starting, and long life.
Double reeving is used on 500-kilogram
units only.
Bottom latch-type swivel hooks meet OSHA
requirements and are supported by anti-friction
needle type thrust bearings.
High-strength aluminum
housing for maximum
portability and weather
resistance. Strong yet light-
weight with a durable powder-
coated finish.
Internal muer reduces sound
levels to a best-in-the-industry
75 dBA.
Optional fabric chain
container (available at extra
cost) helps keep slack chain
out of the way.
Full flow pendent for maximum
control and enhanced load
positioning capabilities.
Standard link load chain is
zinc-plated steel DAT grade 80.
Ergonomic pendent handle
(shown with optional E-stop)
is rugged and durable. Guard
covers both levers and can be
used with or without gloves.
Optional E-stop (available at
extra cost) makes this hoist
CE-compliant.
CLK Series
Pneumatic hoists: 125-, 250-, and 500-kg models