Product Manual

Footer 35
35
Electric Chain
Hoists
ingersollrandproducts.com/liing
B
(1)
D
(1)
C
L
P
H
S
M
N
J
A
E E
F G R
T
(1)
ULE2 Series Dimensions†
A B C D E E1 F G H J L M N P* R S T**
Model in in in in in in in in in in in in in in in in in
ULE2_010-8-6 7 33 16.5 16.5 7.8 7.8 12 10 0.6 1.1 1.1 4.5 0.9 S6X12.5 6 6 9.3
ULE2_015-8-6 7 33 16.5 16.5 7.8 7.8 12 10 0.6 1.1 1.1 4.5 0.9 S6X12.5 6 6 9.3
ULE2_020-8-6 7 33 16.5 16.5 7.8 7.8 12 10 0.6 1.1 1.1 4.5 0.9 S6X12.5 6 6 9.3
ULE2_030-8-6 8 33 16.5 16.5 9 9 14 13 0.6 1.3 1.3 6.4 1 S8X18.4 6 8 5.5
ULE2_040-8-6 8.5 33 16.5 16.5 9 9 14 13 0.6 1.7 1.3 6.4 1 S8X18.4 6 8 5.5
ULE2_050-8-6 9.5 50.5 23.5 24.9 7.4 7.4 12 15 0.9 1.7 1.4 7.2 0.9 S10X25.4 6 9 12
ULE2_060-8-6 9.5 50.5 23.5 24.9 7.4 7.4 12 15 0.9 1.7 1.4 7.2 0.9 S10X25.4 6 9 12
ULE2_080-8-6 12 50.5 23.5 24.9 8.4 8.9 14 13.5 0.6 2.1 1.7 8.3 1.1 S10X25.4 6 10 12
ULE2_100-8-6 12.5 50.5 23.5 24.9 8.5 9.8 15.6 14.4 0.6 2.3 1.8 9.8 0.9 S12X31.8 6 11.7 10
ULE2_120-8-6 12.5 50.5 23.5 24.9 8.5 9.8 15.6 14.4 0.6 2.3 1.8 9.8 0.9 S12X31.8 6 11.7 10
ULE2_160-8-6 14.5 54.5 25.5 26.9 11.9 11.9 18.6 18.6 0.6 3 2 11.8 1 S15X42.9 6 13.5 3.5
ULE2_200-8-6 18 54.5 25.5 26.9 12.1 12.4 19.3 19 0.8 3.6 2 11.8 1 S18X54.7 6 13.5 2.5
ULE2_240-8-6 18 54.5 25.5 26.9 12.1 12.4 19.3 19 0.8 3.6 2 11.8 1 S18X54.7 6 13.5 2.5
Notes:
†ULA2 air hoist specifications and dimensions are similar. Consult Customer Service for further information.
*Minimum standard I-beam for proper wheel running clearance. Contact factory for smaller beams. Customer must verify beam is adequate for applied loads.
**For standard motor and brake only.
Example: ULE2-MT-010-10-6TW
ULE2 MT 010 10 6 TW–– – –
Base model
ULA2 = Air
ULE2 = Electric
Capacity
010 = 909 kg = 2,000 lb
015 = 1364 kg = 3,000 lb
020 = 1818 kg = 4,000 lb
030 = 2727 kg = 6,000 lb
040 = 3636 kg = 8,000 lb
050 = 4545 kg = 10,000 lb
060 = 5455 kg = 12,000 lb
080 = 7273 kg = 16,000 lb
100 = 9091 kg = 20,000 lb
120 = 10909 kg = 24,000 lb
160 = 14545 kg = 32,000 lb
200 = 18182 kg = 40,000 lb
240 = 21818 kg = 48,000 lb
Li ()
10 = 10 
(standard)
XX = Specify
length
Pendent drop
6 = 6 
(standard)
XX = Specify
length
Options
C = Chain container
X = Electric mainline power
interrupt and pendent
buttons
W = Electric (NEMA 4)
watertight control
box, limit switches and
pendent
T = Electric thermal overload
relays — each single
speed motor
L = Electric fused control
per leg of transformer
secondary
E = Electric motor fuses —
single speed hoist
F = Electric motor fuses —
single speed hoist and
trolley
HOW TO ORDER
Trolley options
PT = Plain tapered
PF = Plain flat
MT = Motorized tapered
MF = Motorized flat
GT = Geared tapered
GF = Geared flat
NOTES:
S*COR*E options and marine finish are available.
Consult factory for flange widths over - 6” up to 1 t - 6.625” up to 1.50 and 2 t
7.25” on 3 and 4 t - 8.25” on 5 to 12 t.
Ultra-Lo hoists are not adjustable for varying beam sizes.
Beam type, size, height, width and curve radius required for all orders.
Customer to verify their beam is adequate for loads applied.
ULE2 Ultra-Lo Series
0.25 to 24 ton liing capacity