Product Manual

14
Air Chain
Hoists
866-207-6923
Hoist accessories for MLK and HLK Series
Pendent Handles
NPT Air Inlet
A B C D
Type / Part Number in in in in
SINGLE-MOTOR
MLK-A269C 1/8 1/8 N/A N/A
EZG-A269 3/8 1/8 N/A N/A
MR-269C 3/8 3/8 N/A N/A
C6H20A-A169B 1/2 1/2 N/A N/A
TWO-MOTOR
PILOT-A122B 3/8 1/8 1/8 N/A
MLK-K122B 3/8 1/8 3/8 N/A
MR-A122C 3/8 3/8 3/8 N/A
C6H20A-A122B 1/2 1/2 3/8 N/A
THREE-MOTOR
PILOT-A132B 3/8 1/8 1/8 1/8
MLK-K132B 3/8 1/8 3/8 3/8
MR-A132C 3/8 3/8 3/8 3/8
C6H20A-A132B 1/2 1/2 3/8 3/8
When a pendent-controlled hoist is purchased with a pendent-controlled power trolley or
tractor, the required two- or three-motor pendent is furnished at no extra cost in place of an
individual pendent, when specified.
Pull Chain Conversion
Part Number Description
MLK-K415A Wooden directional and crossbar handles only
CA110-B240 Standard chain; specify total length of both chains
DO2-1413 Aluminum spark-resistant chain; specify total length of both chains
Pendent Conversion Kit
Part Number Description
MLK-AL269C MLK Series, HLK Series, and HLKR Series hoists;
specify length
Quick Exhaust Valves
Pendent
Part For Use Control Length Quantity
Number With Type Style  Recommended*
20417 All MLK Series Pilot Push-on 21 – 50 2
20417 HLK Series hoists 1/4” NPT hose 51 – 75 4
MR-939-6 TIR Series trolleys Full-flow Push-on 21 – 50 2
MR-939-6 MTK Series tractors 3/8” NPT hose 51 – 75 4
*The first pair of full-flow valves will be installed between 5’ and 7’ from the pendent
handle. Any additional valves will equally divide the remaining hose length.
Part number 20417. Part number MR-939-6 not shown.
B
A NPT supply
B
C B B C
A NPT supply
C CB B DD
A NPT supply
Single motor Two motor Three motor
Drawbar Hitch Kits for Use with MTK Series Tractors
Series Part Number
HL1000K, HL1500K, HL2000K No kit required; standard drawbar kit included
and HL3000K with rigid trolley with MTK Series tractors fits these hoists
MLK with rigid trolley MR-K1
Link Load Chain
Bulk Chain Size
Part Diameter / Pitch
Series Type Number mm
MLK Zinc-plated* M745Z 6.4 x 19.5
MLK Stainless steel** M745S 6.4 x 19.5
HLK Zinc-plated* H745Z 9.5 x 25.7
HLK Stainless steel** H745S 9.5 x 25.7
*Standard.
**For spark-resistant models only.