Product Manual

Page 2 of 12 PX01X-XXX-XXX-AXXX (en)
MODEL DESCRIPTION CHART
Model Code Explanation
Example: PX01 X
-
XXX
-
XXX
-
AX
XX
Model Series
PD01- Standard Pump
PE01- Electronic Interface
NOTICE: All possible options are shown in the chart, however, certain combinations may not be recommended.
Consult a representative or the factory if you have questions concerning availability.
For Special Testing options, please contact your nearest Ingersoll Rand Customer Service Representative or Distributor.
E- Groundable Polypropylene ()
P - Polypropylene
H- Hybrid 1/4” NPT / BSP
D- Groundable Acetal ()
E- Groundable Acetal (Multiple port) ()
K- Kynar PVDF
L- Kynar PVDF (Multiple port)
P- Polypropylene
R- Polypropylene (Multiple port)
S- Stainless Steel
D- Acetal
K- Kynar PVDF
P- Polypropylene
0- Polypropylene (Flex Check Spacer)
1- Acetal (Flex Check Spacer)
2- PVDF (Flex Check Spacer)
A- Santropene
C- Hytrel
G- Nitrile
J- Nitrile (ex check only)
K- EPR (ex check only)
L- Viton (ex check only)
N- Neoprene (ex check only)
T- PTFE
A- Santoprene
C- Hytrel
G- Nitrile
T- PTFE
A- Revision
A- Solenoid 120 VAC,110 VAC and 60 VDC
B- Solenoid 12 VDC, 24 VAC and 22 VAC
C- Solenoid 240 VAC, 220 VAC and 120 VDC
D- Solenoid 24 VDC, 48 VAC and 44 VAC
E- Solenoid 12 VDC NEC/CEC ()
F- Solenoid 24 VDC NEC/CEC ()
G- Solenoid 12 VDC ATEX/IECEx ()
H- Solenoid 24 VDC ATEX/IECEx ()
J- Solenoid 120 VAC NEC/CEC ()
K- Solenoid 220 VAC ATEX/IECEx ()
N- Solenoid with no Coil ()
0- Standard Valve Block (No Solenoid) ()
E- End of Stroke feedback + Leak Detection
F- End of Stroke feedback
G- End of Stroke ATEX/IECEx ()
H - End of Stroke + Leak Detection ATEX/IECEx ()
L- Leak Detection
M - Leak Detection ATEX/IECEx / NEC/CEC ()
R- End of Stroke Feedback NEC/CEC ()
T- End of Stroke Feedback + Leak Detection NEC/CEC ()
0- No option
Center Body Material
Connection
Fluid Caps / Manifold Material
Hardware Material
Seat / Spacer Material
Check Material
Diaphragm / O-Ring Material
Revision
Specialty Code 1 (Blank if no Specialty Code)
Specialty Code 2 (Blank if no Specialty Code)
Special Testing
() Only options indicated with an asterisk () are acceptable for use in hazardous locations, however, certain combinations are not possible.