User's Manual

Access Point Product Specification Compliance Certifications
12 014-0030-00 Rev. G
489-2: Clause
Test
8.7
Conducted Emissions (Telecom port)
9.2
Radiated Immunity
9.3
ESD
9.4
Fast Transient Burst Immunity
9.5
RF Common Mode
9.7
Voltage Dips & Interruptions
9.8
Voltage Surges
4.3 ETSI RFID Certification
The ETSI RFID certification is based on EN 300-440-2 V1.4.1 requirements:
 Electromagnetic compatibility and Radio spectrum Matters (ERM)
 Short range devices
 Radio equipment to be used in the 1 GHz to 40 GHz frequency range; Part 2
The AP is certified for the channels and frequencies listed in Table 2.
Table 9. Countries in which the AP is certified for ETSI RFID
Country
Certification
Approval Received
Conditions of Notification (where applicable)
France
Yes
ANFR Has Power Restrictions. Please contact French
Telecom regulatory authority ARCEP to provide precise
info on the conditions of use of this equipment,
packaging, and instructions. See http://www.arcep.fr
Germany
Yes
None
Ireland
Yes
All apparatus for wireless telegraphy requires a license
unless that apparatus has been specifically exempted.
See www.askcomreg.ie
Spain
Yes
None
Switzerland –
Liechtenstein
Yes
None
United Kingdom
Yes
Need DOC to be available to user and Wireless
Equipment that is intended for use in the UK must
comply with the UK Interface Requirements, which can
be obtained from Ofcom’s website at:
http://www.ofcom.org.uk/radiocomms/ifi/tech/interface_
req/