Specifications
Table Of Contents
- Revision History
- 1 Overview
- 2 DC and RF Characteristics
- 3 Electrical Interface
- 4 Safety Considerations
- 5 Regulatory Considerations
- 6 Installation of TRN-2013 Board
- 7 Provisioning
- Appendix A RF Test Mode Interface
- A.1 Normal Operating Mode 0
- A.2 Non-Persistent Idle / Factory Test Mode 1
- A.3 Persistent Idle / Factory Test Mode 2
- A.4 Non-Persistent Node RF Test Mode 3
- A.5 Persistent Node RF Test Mode 4
- A.6 Non-Persistent Manufacturing Cal Mode 5
- A.7 Persistent Manufacturing Cal Mode 6
- A.8 Non-Persistent Meter Diagnostic Mode (Not Yet Implemented)
- A.9 Setting eMCM to Test Mode 1 - Non-Persistent Idle Factory Test Mode
- A.10 Setting eMCM to Test Mode 2 - Persistent Idle Factory Test Mode
- A.11 Setting eMCM to Test Mode 3 - Non-Persistent RF Test Mode
- A.12 Setting eMCM to Test Mode 4 - Persistent RF Test Mode
- Appendix B REACH Compliance Statements
- Appendix C Abbreviations and Terms
- Appendix D TRN-2013 Mechanical Drawing and Schematics
TRN-2013 Integration Specification Regulatory Considerations
On-Ramp Wireless Confidential and Proprietary 18 014-0057-00 Rev. B
5.9 RoHS Directive
The TRN-2013 and node comply with RoHS directive 2002/95/EC. On-Ramp Wireless has
received Certificates of Conformance (CoC) for all components, printed circuit board and
contract manufacturers for the TRN-2013 and the Node. Copies of the CoCs are stored at On
Ramp Wireless and available upon request.