Specifications

Before you begin, please read this.
If any of you are using other than new CheckManager 3000 units, we suggest you "blast
the memory" clean before beginning the process of downloading our programming.
This information comes directly from the CheckManager 3000 Tech Support staff.
To clean the memory of a CheckManager 3000:
1. HOLD CLEAR KEY DOWN (8-10 SECONDS) UNTIL IT ASKS FOR A
PASSWORD.
2. ENTER PASSWORD OF 246135 AND PRESS ENTER.
3. "UNIT CONFIG MODE" DISPLAYS.
4. PRESS ENTER.
5. PRESS "0” (this is a zero).
6. "PASSWORD" AGAIN DISPLAYS.
7. PRESS 4 ALPHA ALPHA ALPHA 1937 AND PRESS ENTER.
8. "CLEARING UNIT" WILL DISPLAY.
9. ALLOW TO RUN UNTIL "UNIT CONFIG MODE" AGAIN DISPLAYS.
10. UNPLUG UNIT (Power down).
11. THE UNIT IS NOW READY FOR OUR PROGRAMMING.
Rev. 04/19/2006