User Manual

Product name : iCT220/iCT250 • 10/21 Copyright © 2012 Ingenico
900002734 R11 000 05/4012 All rights reserved
1
2
4
3
caps
4.3.2. Kit Magic Box installation
WARNING
Connecting must be done when the terminal is powered off.
Follow the installation instructions shown below:
• Plug:
1 Power lead
2 Telephone line
3 Ethernet cable
4 Serial link RS232 cable
• Install caps in the lead-through (as indicated on
the figure).
• Close the compartment with the special cover
provided in the kit, like the procedure described at
chapter 4.3.4.