Conference Speaker (Omnidirectional microphone) User manual
Please read the manual carefully before using the product and keep it properly 01 What’s in the box Conference speaker unit USB charging cable -1-
02 Product overview Volume up One-click voice assistant Answer/Hang up Volume down Bluetooth/Mute -2-
03 Recharging a ) Recharging the product USB socket b ) Power indicator status LED remain on Battery fully charged LED flashing Battery charging -3-
04 Connection a ) Connect the product to a computer or mobile device with USB cable b ) Connect a computer or mobile device via Bluetooth.
Press and hold 3S Enter pairing mode Green light flashing Bluetooth in pairing Green light remains Bluetooth successful a ) Every time when powering on, the product will automatically connect to the device you successfully connected last time (if available) b ) To disconnect Bluetooth, press the Bluetooth button again 05 Button function description Press / Press and hold Volume Up/Down Press Answer/Hang up calls Press Wake up mobile phone voice assistant Press and hold 3S, Bluetooth on / Mute
Press and hold 1S Power on/off -6-
06 Specifications a ) Product dimensions：140*140*42mm b ) Speech processing technologies： Deep echo cancellation Multi-stage adaptive noise reduction Automatic gain control technology (AGC) c ) Audio parameters Microphone frequency response：100Hz – 8KHz Pickup range: 3M diameter Speakers frequency response：10Hz – 20Hz Speakers volume ：Max 80dB d ) Supported Operating System Mac OS /Android e ) Interface: USB socket *1 f ) User environmental specifications Power：Standard USB ，5V—2A -7-
Battery capacity：1400mA Battery life：3 hours Standby : 6 days Suggested storage temperature：-10℃—50℃ -8-
07 *RF warning for Mobile device: This equipment complies with FCC radiation exposure limits s et forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
08 FCC Caution. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
Warranty terms 1. lease fill in this card carefully and read the following warranty terms carefully to ensure that the product is effectively guaranteed:： 1， Keep this warranty card carefully 2 , Provide this warranty card at time of service 3，The information filled in this warranty card must be true, otherwise it will be invalid 4，Product warranty period is one year. During the warranty period, show this warranty card at time of service. Accessories are not included in the warranty.
accident 3，Damages caused by unapproved maintenance, modification or self-disassembly etc. 4，Product surface’s aging, crash and scratch 3， Service charge will be applied after warranty period expired The illustrations of products, accessories, user interface, etc. in the manual are all schematic diagrams for reference only.
