Manualshelf

Installation Manual

ManualsBrandsInfratech ManualsOutdoor LivingW Series 33" Single Element Heater With 1500 Watt 240V 6.3 Amps In Almond
12345678
Heater must be installed with the quartz tube horizontally level. For maximum tube life, use a carpenter’s level tool to
find the optimum level position for the heater’s body. Always maintain the minimum clearances from the heater body
to any combustible materials.
MOUNTING INSTRUCTIONS
These models may be chain or bracket mounted to any ceiling or horizontal surface. Installation must be such that
18” (45.7cm) minimum clearance is maintained around the heater on all 4 sides and 36” (91.4cm) directly in front.
A minimum of 6” (15.24cm) of clearance provided by mounting brackets is required behind the plane of the face.
Heater can be hung in using chains or custom brackets. Heater must be level, but can be rotated around its
horizontal axis.
SWIVEL MOUNTING BRACKETS
(CEILING OR WALL MOUNT)
INSULATED
HOUSING
LENGTH WILL VARY
DEPENDING ON MODEL
4
These models may be chain or bracket mounted to any ceiling or horizontal surface. Installation must be such that
18” (45.7cm) minimum clearance is maintained around the heater on all 4 sides and 36” (91.4cm) directly in front.
A minimum of 6” (15.24cm) of clearance provided by mounting brackets is required behind the plane of the face.
Heater can be hung using chains or custom brackets. Heater must be level, but can be rotated around its
horizontal axis.
Heater must be installed with the quartz tube horizontally level. For maximum tube life, use a carpenter’s level tool to
find the optimum level position for the heater’s body. Always maintain the minimum clearances from the heater body
to any combustible materials.
MOUNTING INSTRUCTIONS
These models may be chain or bracket mounted to any ceiling or horizontal surface. Installation must be such that
18” (45.7cm) minimum clearance is maintained around the heater on all 4 sides and 36” (91.4cm) directly in front.
A minimum of 6” (15.24cm) of clearance provided by mounting brackets is required behind the plane of the face.
Heater can be hung in using chains or custom brackets. Heater must be level, but can be rotated around its
horizontal axis.
SWIVEL MOUNTING BRACKETS
(CEILING OR WALL MOUNT)
INSULATED
HOUSING
LENGTH WILL VARY
DEPENDING ON MODEL
4