Installation Sheet

2-1/2" (6.3cm)

8-3/4" (22.2cm)

4-3/4" (12.0cm)

3" (7.6cm)

4" (10.1cm)

SL-Series Brackets are designed for two positive stop positions.

The Heater can be hung in a horizontal position using chains or

custom brackets. The Heater must be level, but can be rotated

around its horizontal axis.

For a Shallow Angle Installation (30º off the wall) mount both

brackets with the "longer length stop" positioned on the bottom.

For a Steeper Angle Installation (45º off the wall) mount both

brackets with the "shorter length stop" positioned on the bottom.

MODEL MINIMUM SPACING BETWEEN BRACKETS

SL 16XX 12" (30.5cm)

SL 24XX 20" (50.8cm)

SL 30XX 30" (76.2cm)

SL 40XX 30" (76.2cm)

MOUNTING INSTRUCTIONS

BRACKET SPACING

These models may be chain or bracket mounted to any ceiling or horizontal surface. Installation must be such that

18" (45.7cm) minimum clearance is maintained around the heater on all four sides and 36" (0.9m) directly in front. A

minimum of 6" (15.2cm) of clearance provided by mounting brackets is required behind the plane of the face.

Adjustable wall/ceiling brackets are furnished with all SL-Series Heaters. Brackets have positive stops at 30°and

45°. Brackets are positioned along the “T” slot on back of unit. You must maintain a minimum distance between the

mounting brackets to ensure a stable installation.

PRIOR TO INSTALLING HEATERS, PLEASE READ BELOW FOR OPTIONAL MOUNTING ANGLES.

SHORTER

LONGER

SHORTER

LONGER

DETAIL A

DETAIL B

SHALLOW ANGLE

STEEPER ANGLE

SWIVEL MOUNTING BRACKET

(CEILING OR WALL MOUNT)

INSULATED HOUSING

LENGTH WILL VARY

DEPENDING ON MODEL