Reference Manual
12
Control Options
Zone Analog Controller
n
Zone Analog Controllers offer the ability to control
one or more heaters in a speciļ¬ed target area.
n
All heaters in each zone will be controlled
simultaneously.
n
Each Zone Analog Intensity Control Knob can
control a maximum of three relays from the Solid
State Relay Panel.
n
The Zone Analog Control is wired to the Solid State
Relay Control Panel with a low voltage wire (CAT 5
or comparable).
n
The Zone Analog Control also requires 1 amp of
120V from a local circuit.
n
Digital Timers include intervals of 15 min, 30 min,
60 min, 2 hours, and 4 hours.
For use in conjunction with the Solid State Relay Panel
Two Zone Analog Controller w/Digital Timer
PART# DESCRIPTION
EXTERIOR DIMENSIONS
FACE PLATE DIMENSIONS
30-4045 One Zone Analog Controller w/ Digital Timer 4-1/2" x 6-3/4" x 2-1/2" 5-1/2" x 7-3/4"
30-4046 Two Zone Analog Controller w/ Digital Timer 4-1/2" x 12-1/4" x 2-1/2" 5-1/2" x 13-3/16"
30-4047 Three Zone Analog Controller w/ Digital Timer 4-1/2" x 14-3/16" x 2-1/2" 5-1/2" x 15 "
30-4048 Four Zone Analog Controller w/ Digital Timer 4-1/2" x 17-3/4" x 2-1/2" 5-1/2" x 18-3/4"
Relay Panels requiring more than six relays are also available by special order. Please contact
customer service for details.