IO 212-NG Installation Manual

2300 / IO 210 Manual

IM110107

RD: APR 2019

R.L. 20C

JP-2100-CB-K: Stainless Steel Ceiling Mount Kit for Patio Heaters

supremeSchwank 2300 / IO-200 Series

Component Quantities and Material Specifications each Kit:

2 x Ceiling Bracket - 12 ga. [0.102”] 316 S/S

2 x 24” [610 MM] Channel Leg - 12 ga. [0.102”] 316 S/S

2 x Heater Attachment Bracket - 12 ga. [0.102”] 316 S/S

12 x ¼” x ¾” Stainless Steel Bolts

12 x ¼” Stainless Steel KEP Nuts

[lock washer attached]

Note: It is the installer’s responsibility to ensure:

 Adequate mounting strength and integrity

to the structure using field supplied 3/8” lag

screws or bolts

 Maintain required clearances to combustibles

from heater

 Refer to manual: heater weights; required

clearances

Assembly: (Fig 8)

The 24” [610 mm] Channel Leg can be cut

to a shorter length

 Ensure required clearances to combustibles

from heater are maintained

Fasten the Ceiling Bracket and Heater Attachment Bracket to the Channel Leg using two

supplied ¼” bolts at each connection as illustrated.

The arc of holes in the Ceiling Bracket allows angling of the Channel Leg from the bracket

up to 45°, and/or mounting the bracket to a sloped ceiling.

The arc of holes in the Heater Attachment Bracket allows angle mount of the heater.

 NOTE: Maximum allowed heater angle is 30°

Fasten an assembled mounting bracket to each end of the Heater Support Bracket

[supplied on heater] using two ¼” bolts supplied.

Note: Only for 2300 Series & IO-200 Series

The Ceiling and Heater Attachment Brackets

can be fitted directly to one another (Fig 9)

without the Channel Leg, and yet achieve mini-

mum clearance of 5-1/2” [140 mm] above for

2300 & IO-200 Series.

Discard the Channel Legs.

Figure 8: CEILING

MOUNT KIT

Figure 9: CEILING MOUNT

KIT - No Channel