User's Manual

WSDU User Manual February 8, 2019
3
2. WSDU Preparation
• Insert the proper length size (S, M and L) Wrist Strap through the Wrist Cuff mount on
the side of the Wrist Cuff under the WSDU display and buttons.
• Curl/wrap the Wrist Cuff into a large round loop or doughnut shape large enough for
putting your hand through the opening.
• Install the WSDU unit onto the Wrist Cuff mount by sliding the unit starting from the back
of the unit with the USB-C port, engage the mounting rails, slide and snap into place.
• Slide the Wrist Cuff with WSDU Unit installed over your hand (through the round loop).
• Tighten and reposition the Wrist Cuff for proper fit.
• Tighten Wrist Strap by looping the strap through the second Wrist Cuff mount and cinch
down the strap to the desired tightness.
• Reposition Wrist Cuff with WSDU Unit installed as desired.
Figure 2: Wrist Cuff and Strap Set-up