User's Manual

3
Introduction
Thank you for selecting RPM as your new
solution for repacking oral solid
medications. This machine, rather
integrated with hospital system or
standalone, is designed to quickly and
easily repack medication with barcodes, lot
number, brand name, generic name and
any other information that will benefit both
the pharmacy and patients.
This guide is to help users to get familiar
with some of the parts consisted in RPM as
well as easily get set up to repack oral solid
medication.
Safe Handling Information
The RPM is designed to be used as a
stationary unit. It is very important that you
handle this machine carefully to avoid
hardware and electrical damage.
Please read the following warnings before
attempting to install, use, or move the RPM
Care and Handling of Your
HP Personal Media Drive
WARNING: The warnings for the
care and handling of the RPM are
listed below
 Do not move the machine while it is
operating to avoid hardware and
electrical damage. You can safely move
the machine only when you have
properly disconnected and powered off
the machine
 Do not use the machine in a hot and
humid atmosphere to prevent machine
and stored medication from
overheating. It is recommended to
keep the room temperature under
24ºC.
 Do not block airflow around the
machine while the machine is turned on.
It is recommended to keep the back
of the machine at least 0.5 meter
away from its facing wall
 Do not stack anything on top of the
machine; this can overheat and damage
the machine
 Do not set any liquids or drinks on the
machine. Liquids can damage the
internal electronics
 Do not use the machine without proper
cleaning. Pill dusts can decrease
machine’s performance and potentially
damage the machine. Please refer to
RPM Cleaning Guide to properly clean
the machine.