User's Manual

INFOPIA CO., LTD Page 9 UM-M (Rev.0)
 Record the result value in your logbook. When glucose
test strip is removed, the glucose test meter turns off
automatically.
CAUTION
1. If the test result is out of the test range, “Hi/Lo” message
will be shown on the LCD window.
2. Safely discard used glucose test strips and lancets in the
proper place, according to the local regulation.
Test Strip Ejector Function
Disposing of your test strip
Once the test is complete,
push the strip forward to
remove the test strip from
the meter
Used test strips may be
considered bio hazardous
waste in your area.
Be sure to contact your
local representative for
proper disposal
Disposing of your lancet
Push the needle into the
protective cover.
Pull the lancet out and
discard accordingly.
CAUTION
1. If you push the ejector button forward too much, it may be
part of the failure.
2. Do not give strong impact to blood glucose test meter.
3. Please follow the waste disposal regulations on the used
lancets and strips imposed by your local authorities.
Reviewing Your Results
The IGM-1001D meter stores up to 365 test results in its
built-in memory, along with the average sugar level for the
number of days, which you had preset the glucose test
meter to calculate.
Reviewing Your blood sugar
Press and release button. The most recent result appears first.
Note the time and day of your blood sugar result. Press and release
the ▼ button and your previous result will appear on the display
Reviewing Your averages
Press and release the ▲ button and your average result will appear
on the display.
Average Test Result
Test Unit
Test Result Amount
Average Test Result Days
Deleting Test Results
Deleting individual test result
To delete any individual test result in the
memory press ▲ or ▼ button for 3 seconds,
while the test result is to delete, displayed
blinking. After the third beep sound you
may hear, the test result is deleted.