IN32 IN34 IN36 User's Guide
Please read the safety instructions booklet before setting up the projector. Unpack the box 1 Here's what's included: Registration / Reference guide / Online resources Register to activate your warranty to ensure eligibilty for service and support, and get special offers and notifications about free product updates.
Connect source Color-coded connections make it easy. You can connect more than one source if needed. Connect to: Computer Got an Apple computer? Computer You may need an adapter. For more information, see How-To Guides at www.infocus.
Turn on projector and source 1 Connect the power cord to the projector and to an electrical outlet The power light 2 on the projector will light amber. Turn on the projector Press power (on the projector or remote). The power light will start blinking green. 3 Wait for the lamp to warm up After a few seconds, the power light will stop blinking and turn green. It can take a minute for the lamp to reach full brightness. 5-10 sec.
1 Adjust the picture Height 1 Projector Location As distance increases, the image gets larger and moves upwards. 2 1 Hold down the release button on top of the projector. 2 Lift the front of the projector to the desired height. Lens center line 3 Release the button. 2 Diagonal Keystone Screen Size Minimum Maximum 60" / 1.5m 7'4" / 2.2m 9'1" / 2.8m 80" / 2m 9'9" / 3m 12'1" / 3.7m 92" / 2.3m 11'3" / 3.4m 13'11" / 4.2m 150" / 3.8m 18'4" / 5.6m 22'8" / 6.
Turn off the projector Press the power button twice The first press shows a confirmation message; the second press confirms that you want to power off. The power light on the projector will blink while the fan cools the lamp. If you need to unplug the projector, wait until the fan stops and the power light stops blinking and stays on. Note: While the power light is blinking, button presses on the projector and remote are ignored.
Troubleshooting If there is no picture or the picture is blank source If the power light is off, make sure the power cord is connected and plugged into a live electrical outlet. If the power light is amber and not blinking, press the power button. Check video source and cables. Make sure the video source (computer, DVD player, VCR, etc.) is turned on and cables are securely connected between the source and the projector. Make sure your computer's video port is enabled.
Questions? We’re here to help! Visit us at: www.infocus.com/support We’re here to support you with your new purchase. We can help you with… • Determining screen sizes • Documentation in other languages • Connecting your sources (TV, DVD, Cable/Satellite, Game, etc.) • Selecting optional accessories • Product warranty protection plans USA, Canada, Latin America Customer Support Telephone +1 (503) 685-8888 TOLL FREE: 800-799-9911 Mon-Fri, 7 am - 5 pm Pacific techsupport@infocus.
