Operation Manual

1. Connection to the network

1.1 System requirements (continued)

• The network communication control is disabled while the projector

is in standby mode if the STANDBY MODE item is set to SAVING. Set the

STANDBY MODE to NORMAL to set up the network communication to the

projector. (&SETUP menu in the Operating Guide)

• You can get the latest application versions for the projector's network functions

and the latest information for this product from the InFocus website (www.

infocus.com/support).

NOTE

1.2 Quick connection

"LiveViewer" supports very quick and simple connection to the network.

When using the network function, we recommend that you install "LiveViewer" on

your computer. For details, refer to the "LiveViewer" manual.

In case you don’t want to use "LiveViewer" or you cannot use it by some reason,

follow the manual settings instructions, item 1.3 for the wired LAN (&7) and item

1.4 for the wireless LAN. (&11)