Operation Manual

6. Network Bridge Function

This projector is equipped with the NETWORK BRIDGE function to perform

mutual conversion of a network protocol and a serial interface.

By using the NETWORK BRIDGE function, a computer that is connected to the

projector via wireless or wired LAN is able to control an external device via RS-

232 communication using the projector as a network terminal.

6.1 Connecting devices

1) Connect the projector’s LAN port to the computer’s LAN port with a LAN

cable, or insert the USB wireless adapter into one of the USB TYPE A ports.

2) Connect the projector’s CONTROL port and the device’s RS-232 port with an

RS-232 cable, for RS-232 communication.

• Before connecting the devices, read the device manuals to ensure

the connection.

For RS-232 connection, check the specications of each port

and use the appropriate cable. (&Connection to the ports in the Operating

Guide - Technical)

NOTE

6. Network Bridge Function

RS-232

RS-232 cable

CONTROL port

LAN port

External device

Wired LAN

LAN cable

Computer

Protocol change

TCP/IP data Serial data

USB TYPE A ports

(USB wireless adapter)

Wireless

LAN