Operation Manual

5
1. Connection to the network
1.1 System requirements
1. Connection to the network
The following equipment is required to connect the projector to your computer
through the network.
■ Common The projector: 1 unit, Computer : minimum 1 set
■ Depending on how you want to connect
1) For the wired connection *1
LAN cable (CAT-5 or greater): 1 piece
2) For the wireless connection *2
- Projector side
IEEE802.11 b/g/n USB wireless adapter (part number: SP-DONGLE-USB) :
1 unit
- Computer side
IEEE802.11 b/g/n wireless LAN equipment: 1 unit for each *3
To connect your computer to the projector and use the projector's network
function, your computer needs to meet the following requirements:
1.1.1 Required equipment preparation
1.1.2 Hardware and software requirement for computer
ü OS: One of the following.
Windows
®
XP Home Edition /Professional Edition
Windows Vista
®
Home Basic /Home Premium /Business /Ultimate /Enterprise
Windows
®
7 Starter /Home Basic /Home Premium /Professional /Ultimate /
Enterprise
ü CPU: Pentium 4 (2.8 GHz or higher)
ü Graphic card: 16 bit, XGA or higher
* When using "LiveViewer", we recommend that your computer's resolution is
set to 1024 x 768.
ü Memory: 512 MB or higher
ü Hard disk space: 100 MB or higher
ü Web browser: Internet Explorer
®
6.0 or higher
ü CD-ROM/DVD-ROM drive
*1: The system for using the projector's network function requires communication
environment conforming 100Base-TX or 10Base-T.
*2: An access point is required when the wireless LAN connection is used as
Infrastructure mode.
*3: Depending on the type of wireless network device and computer you are
using, the projector may not be able to communicate properly with your
computer, even if the computer has embedded wireless LAN.
To eliminate communication problems, use a Wi-Fi certied wireless network
device.