Operation Manual

45
3. Web Control
3.2 Crestron e-Control
®
(continued)
3.2.2 Tools window
Congures the settings between the projector and Crestron
®
control system.
Click the [Exit] button to return to the Main window.
1
Crestron Control
Congures the settings of Crestron
®
control system devices.
Item Description
IP Address
Congures the IP address of the control system.
IP ID
Congures the IP ID of the control system.
Port
Species the port number used for communication by the
control system.
To apply the settings, click the [Send] button.
2
Projector
Congures the network settings of the projector.
Item Description
Projector Name
Congures the name of the projector. The Projector Name can
be up to 64 alphanumeric characters.
Location
Congures the location name of the projector. You can specify
a Location name up to 32 alphanumeric characters.
Assigned To:
Congures the user name for the projector. You can specify a
user name up to 32 alphanumeric characters.
Support characters include spaces and: !"#$%&'()*+,-./:;<=>?@[\]^_`{|}~
To apply the settings, click the [Send] button.
1
4
5
3
2
• Two-byte characters should not be used.
• This window must contain data. It cannot be left blank.
NOTE