Operation Manual

• After the projector is moved, check the date and time set for the

projector before conguring the schedules.

• The internal clock’s time may not remain accurate. Using SNTP is

recommended to maintain accurate time.

• “My Image” and “Messenger” events will not be executed appropriately

but result in a “schedule execution error” when the lamp does not light and/

or display data is not stored in the projector at the scheduled event execution

time.

• “Input Source” and “My Image” events will not be executed if the security

feature is enabled and the projector is locked because of security features.

• Certain projector error states (such as temperature error, lamp error) will

prevent the projector from executing scheduled functions/events.

• If an USB memory device is not detected by the projector or no image for

display exists at the scheduled event time, a schedule execution error will occur

against the scheduled Slideshow event.

• When you start the Slideshow, the input source will automatically switch to

USB TYPE A.

• Image les stored in the root directory of the USB memory device will be

displayed for the scheduled Slideshow.

• Refer to

Troubleshooting in the Operating Guide if scheduled functions

or events are not executing properly.

NOTE

3.1 Projector Web Control - Schedule Settings (continued)

3. Web Control